Abstract Submission
For more information contact us at:
conference@3d-icomas.org
2022 - First Edition
The first edition of the conference was held from October 26 to 28, 2022,
with over 120 in-person participants and included the following sessions:
- Optical, Electronic and Magnetic Materials
- 2D Materials, Thin Films and Interfaces
- Nanomaterials and Applications
- Materials Engineering and Manufacturing
- Materials Characterization
- Energy Materials
- Biomaterials and Applications
2022 Contribution List
Mischa Bonn
Max Planck Institute for Polymer Research, Department of Molecular Spectroscopy, Germany
Charge Transfer and Mobility in Novel (Hybrid) Materials
Luís Dias Carlos
University of Aveiro, Department of Physics, Portugal
Tapping into Luminescence Thermometry. All You Need Is Light
Federico Rosei
INRS - Institut National de la Recherche Scientifique, Centre for Energy, Materials and Telecommunications, Canada
Materials for Sustainability and Sustainable Materials
Tsutomu Miyasaka
Toin University of Yokohama, Graduate School of Engineering, Japan
Materials and Interface Engineering for High Performance Halide Perovskite Photovoltaics
Boris Mizaikoff
Ulm University, Institute of Analytical and Bioanalytical Chemistry & Hahn-Schickard, Germany
Molecularly Imprinted Materials: What to Expect from the Next Generation?
Esther Vázquez Gomez
Autonomous University of Barcelona, CIBER de Bioingeniería, Biomateriales y Nanomedicina, Spain
Deconstructing Protein Nanoparticles for Targeted Therapy
Silvio Decurtins
University of Bern, Department of Chemistry, Switzerland
Homo- and heterocycles on surface
and in nano-junctions
Jean-Marie Dubois
Jožef Stefan Institute, Ljubljana, Slovenia & Institut Jean Lamour, Nancy, France
Potential and marketed applications of quasicrystalline alloys
Jozef Keckes
University of Leoben, Austria
Cross-sectional structure-property analysis and design in nanostructured thin films
Hélio Chacham
Federal University of Minas Gerais, Physics Dept., Brazil
Effect of large strain on the electronic and structural properties of 2D materials
Antonio Villaverde
Autonomous University of Barcelona, CIBER de Bioingeniería, Biomateriales y Nanomedicina, Spain
Self-disintegrating amyloids as microscale depots for protein drug delivery
Ana Belén Pereiro Estévez
NOVA University of Lisbon,
Department of Chemistry, Portugal
Alternative task-specific materials for mitigation of the environmental impact of fluorinated greenhouse gases
Robert Schennach
Graz University of Technology, Institute of Solid State Physics, Austria
Adhesion between complex surfaces: what can we learn from paper?
Daniele Passerone
Empa, Swiss Federal Laboratories for Materials Science and Technology, Switzerland
Optimizing graphene nanoribbon based nanodevices at the atomistic level: a joint experimental/modelling strategy
Riccardo Rurali
Institute of Materials Science of Barcelona, Dept. of Materials Simulation and Theory, Spain
Electrophononic couplings in multifunctional oxides: towards an all-electric control of the heat flux based
Darko Makovec
Jožef Stefan Institute, Department for Materials Synthesis, Ljubljana, Slovenia
New polymorphs of compounds with a complex layered crystal structure stabilized at the nanoscale
Lioz Etgar
Institute of Chemistry, The Hebrew University of Jerusalem, Israel
Bifacial fully printable low dimensional perovskite solar cells
Vincent Fournée
Université de Lorraine – CNRS, France
Synthesis and characterization of novel quasicrystalline materials in the 2D limit
Hiroyuki Aoki
J-PARC Center, Japan Atomic Energy Agency, Japan
Interfacial properties of polymer thin film studied by quantum beam techniques
Christian Teichert
Montanuniversität Leoben, Institute of Physics, Austria
Phyllosilicate minerals as a platform for air-stable 2D magnetic materials
Darja Lisjak
Jožef Stefan Institute, Ljubljana, Slovenia
Hybridization of ferrite nanoparticles with chelating ligands: interaction mechanisms and consequences for the magnetic properties
Thomas Wågberg
Umeå University, Department of Physics, Sweden
Novel strategies for efficient water electrolysis
Kazumichi Namikawa
Tokyo Gakugei University, Dept. of Physics, Japan
Self-assembly of mesoscopic hierarchic polarization domain in relaxor ferroelectrics Pb[(Mg1/3Nb2/3)1-xTix]O3
Carlos DS Brites
University of Aveiro, Physics Dept. and CICECO - Aveiro Institute of Materials, Portugal
Lanthanide luminescence to mimic molecular logic and computing through physical inputs
Kazunari Domen
Shinshu University and University of Tokyo, Japan
Particulate photocatalysts for water splitting to produce solar hydrogen
Ugutz Unzueta Elorza
Sant Pau Biomedical Research Institute, Barcelona, Spain
Engineering a human GFP-like protein as scaffold nanomaterial for targeted drug delivery
Hajo Dieringa
Helmholtz-Zentrum Hereon, Institute of Material and Process Design, Germany
Hybrid processes for the production of ex-situ magnesium-based nanocomposites
André Barbosa
Pontifical Catholic University of Rio de Janeiro, Department of Physics, Brazil
Characterization of transition metal dichalcogenides using resonance Raman spectroscopy
Georges Raseev
Institute of Molecular Sciences of Orsay, University of Paris-Saclay, France
MIM thin film stack: avoided crossing of surface plasmon polariton and wave guide modes and figures of merit for sensors
Nuno Peixinho
University of Minho, Department of Mechanical Engineering, Portugal
Laser heat treatment process and application in selective modification of material properties
Johann Toudert
ENSEMBLE 3 - Centre of Excellence, Warsaw, Poland
Bismuth nanostructures: fabrication, optoelectronic properties and applications
Frederic Grillot
Institut Polytechnique de Paris, France
Semiconductor quantum dots: genesis, prospects & challenges
Teresa Cidade
NOVA University of Lisbon FCT-NOVA, Materials Science Dept., Portugal
Development of injected Pluronic hydrogels loaded with nano/microparticles for active cargo delivery
Jodok Weixler
ETH Zurich, Institut für Werkzeugmaschinen und Fertigung, Switzerland
Laser contact angle analysis for 300 fs pulsed laser ablation of Al2O3
Nevenko Biskup Zaja
Complutense University of Madrid, Materials Science Dept., Spain
Epitaxial strain in oxide thin films and heterostructures
Bhaskaran Muralidharan
Indian Institute of Technology Bombay, Dept. of Electrical Engineering, India
Computational topological electronics: from quantum matter to emerging devices
Gunnar Suchaneck
Dresden University of Technology, Institute of Solid-State Electronics, Germany
Tunnel magnetoresistance in double-perovskite strontium ferromolybdate
Bernard Pelissier
CNRS, LTM, MINATEC Campus, Grenoble, France
Quasi in-situ advanced characterizations for materials upfront studies and process development in microelectronics
Andor Kormányos
Eötvös Loránd University, Dept. of Physics of Complex Systems, Hungary
Induced spin-orbit coupling in twisted graphene-TMDC heterobilayers: twistronics meets spintronics
Oleksandr Tkach
CICECO Aveiro Institute of Materials, University of Aveiro, Portugal
Thermoelectric performance of Nb-doped SrTiO3 enhanced by carbon nanoadditives and nanostructuring
Konrad Eiler
Autonomous University of Barcelona, Department of Physics, Spain
Nanostructured Ni-based electrocatalysts for hydrogen energy
Georgios Kalosakas
University of Patras, Materials Science Dept., Greece
Structural properties and G-band splitting of graphene under uniaxial strain
Emanuele Orgiu
Institut national de la recherche scientifique, Énergie Matériaux Télécommunications Research Centre, Canada
Hybrid molecule/quantum material van der Waals heterostructures
Yusuke Onuki
Tokyo Denki University, Department of Advanced Machinary Engineering, Japan
Deformation induced martensite phases in austenitic steel and their textures
Marco Truccato
University of Torino, Department of Physics, Italy
Interactions between X-ray nanobeams and selected functional oxides exploited for X-ray nanopatterning
Wen-Shan Zhang
Bioquant, University Hospital & University Heidelberg, Germany
Evaluating charge-carrier mobility of organic semiconductor with dynamic charging map
Shin-ichi Kimura
Osaka University, Graduate School of Frontier Biosciences and Dept. of Physics, Japan
Origin of the valence transition in samarium monosulfide
Hariprasath Ganesan
Institute of Material Systems Modeling, Helmholtz-Zentrum Hereon, Geesthacht, Germany
Atomistic insights into the thermo-mechanical behavior of TiAl alloys
Frank Peiris
Kenyon College, USA
Investigating the quality of molecular beam epitaxy-grown multilayer films via in-situ Spectroscopic Ellipsometry
Luis Foà Torres
University of Chile, Department of Physics, Santiago, Chile
Surprises from electron-phonon interaction with chiral phonons in two-dimensional materials
Manel Rodriguez Ripoll
AC2T Research GmbH, Austria
Tailoring materials for reducing friction
Raphael Pfattner
Materials Science Institute of Barcelona, ICMAB-CSIC, Spain
Sensing with molecular materials – From intrinsic materials properties to selective sensors
Haim Taitelbaum
Bar-Ilan University, Israel
Spreading of metal on metal-on-glass in room temperature
Madoka Takai
University of Tokyo, School of Engineering, Department of Bioengineering, Japan
Biocompatible polymer hydrogels for implantable biosensors and biofuel cells as health monitoring
Xavier Allonas
University of Haute Alsace, France
Vat photopolymerization for 3D printing: from photochemical events to shape memory materials
Mariana-Dana Damaceanu
Petru Poni Institute of Macromolecular Chemistry, Romania
Energy-related polymer materials: from electrochromic to energy storage applications
Papken Hovsepian
Sheffield Hallam University, UK
TiN/NbN superlattice coatings deposited by high power impulse magnetron sputtering potential candidate to protect medical grade CoCrMo alloys
Olivier Lame
University of Lyon, INSA Lyon, MATEIS, France
Impact of seisms on mechanical properties of Polyethylene tube
Maria Raposo
NOVA University of Lisbon, Department of Physics, Portugal
Organized organic thin films: a way to develop synthetic biology?
Enrique Munoz
Instituto de Fisica, Pontificia Universidad Católica de Chile, Santiago, Chile
Transport coefficients in torsional-strained Weyl semimetals
Adrien Carretero Genevrier
Institut d'Electronique et des Systèmes, France
Silicon epitaxy assisted by soft-chemistry:
a platform for integrated oxide devices
Gareth Nisbet
Diamond Light Source, UK
Fingerprinting phason strain using diffuse multiple scattering
Jesus Prado-Gonjal
Complutense University of Madrid, Dept. of Inorganic Chemistry, Spain
Microwave synthesis: a green chemistry approach for the preparation of energy materials
Alexandre Reily Rocha
Institute of Theoretical Physics, Saõ Paulo State University, Brazil
Simulating hot carrier relaxation in materials: from bulk to low dimensional systems
Ariadne Lakshmidevi Juwono
University of Indonesia, Departement of Physics, Indonesia
The usage of Indonesian kenaf fiber for green - light weight composite boards
Claire Lemarchand
CEA - The French Alternative Energies and Atomic Energy Commission, Arpajon, France
Polymers under shock loading: insights from molecular simulations
João Araújo
NOVA University of Lisbon, Department of Chemistry, Portugal
Functionalized ionic liquids and deep eutectic solvents: advances in biomolecules purification and drug formulation
Gustavo Martini Dalpian
Center for Natural and Human Sciences,
Federal University of ABC, Brazil
Intrinsic limitations for doping halide perovskites
Juan Fco. Sánchez Royo
Materials Science Institute, University of Valencia, Spain
Photoemission study on stability of two-dimensional lead iodide perovskites
Ivaldo Leão Ferreira
Federal University of Pará, Brazil
Designing size and shape of nucleus and grain coalescence during alloy solidification
Christin David
Friedrich Schiller University Jena, Germany
Selectively enhancing second harmonic generation from diffraction at gold nanogratings
Sérgio Ricardo de Lázaro
State University of Ponta Grossa, Department of Chemistry, Brazil
DFT/HSE06 investigation on CaFeO3 material, magnetic states, and oxygen vacancy
Grigorios Itskos
University of Cyprus, Department of Physics, Nicosia, Cyprus
Optical amplification based on lead halide perovskite nanocrystals
Ehrenfried Zschech
deepXscan GmbH, Germany
Nano-XCT studies of materials for electrochemical energy storage and conversion
João Horta Belo
University of Porto, Department of Physics and Astronomy, Portugal
Tailoring negative thermal expansion in magnetocaloric compounds
Marcelo Roldán Blanco
CIEMAT - National Fusion Laboratory, Madrid, Spain
Advanced techniques for micromechanical and microstructural analysis in new structural materials for nuclear fusion applications
Tetsuhiro Katsumata
Tokai University, Department of Chemistry, Japan
Synthesis and local structure of perovskite-type oxyfluorides
Jérôme Long
University of Montpellier, France
Multifunctional single-molecule magnets: the quest for cross-coupling between properties
Norbert Nickel
Helmholtz-Zentrum Berlin für Materialien und Energie, Germany
Properties of hydrogen in β-Ga2O3
Oleksii Volkov
Helmholtz-Zentrum Dresden-Rossendorf, Germany
Curvilinear nanomagnetism
Michal Malcek
Slovak University of Technology, Bratislava, Slovakia
Graphene quantum dots modified with first row transition metals as materials for hydrogen storage
Vivi Fauzia
University of Indonesia, Physics Dept., Indonesia
Zinc oxide/transition metal dichalcogenides nanosheets heterostructures for humidity sensor and photocatalysis application
Rumyana Lazarova
Institute of Metal Science “Acad. A. Balevski” – Bulgarian Academy of Sciences, Sofia, Bulgaria
Aluminum/graphene nanocomposites with mechanical and chemical phase bond
Ignacio Martin-Fabiani
Loughborough University, Department of Materials, UK
Colloidal science as a tool to control the architecture of waterborne coatings
Fiorenzo Vetrone
INRS - Institut National de la Recherche Scientifique, Canada
Rare earth doped nanoparticles: optical properties and applications in nanomedicine
Natalia Martsinovich
University of Sheffield, Department of Chemistry, UK
Beyond graphene: theoretical modelling of structure-property relationships of graphene oxide and graphene aerogels
Aswathi Kanjampurath Sivan
University of Basel, Department of Physics, Switzerland
Phonon engineering in GaAs-GaP superlattice nanowires
Simona Achilli
University of Milan, Department of Physics, Italy
Ab initio characterization of hybrid organic-inorganic interfaces
Hélène Brault
Jean Rouxel Institute of Materials, CNRS, Nantes University, France
Luminescence thermometry of Eu-Tb mixed metal-organic frameworks: some ways to tune the thermometric performances
Aubin Devillaire
CEA Cadarache, France
Can metallic precipitates be reduced in uranium dioxide?
Viktor Danchuk
Ariel University, Israel
Structure peculiarities and morphology of scandium stabilized cubic zirconia thin films deposited with reactive DC magnetron co-sputtering
Mohammed Khalifa
Kompetenzzentrum Holz GmbH, Austria
Conductive polymer coated paper sensor for real-time cure and health monitoring of polymer composites
Izidor Straus
University of Ljubljana, Slovenia
Magneto-responsive surface structures
based on magneto-active elastomers
Joel Borges
University of Minho e Porto CF-UM-UP, Physics Department, Portugal
Development of nanostructured plasmonic thin films by reactive magnetron sputtering for T-LSPR sensing applications
Irina Butnaru
Petru Poni Institute of Macromolecular Chemistry, Romania
Copolyimides incorporating nitrile and jeffamine moieties for high dielectric constant materials
Koen Houtsma
University of Groningen, Faculty of Science and Engineering, Netherlands
Changing graphene’s properties: graphene nanoribbons vs. molecular patterning
Lynndle Square
North-West University, Potchefstroom, South Africa
Mechanical properties and thermal conductivity studies of pristine and poly (2, 5-benzimidazole) multi-walled carbon nanotube composites
Kira Seleznyova
Physics and Technology Institute, Crimean Federal University, Crimea
Transparent magnets
Mahmoud Barati
CentraleSupélec, Paris-Saclay University, France
Study of dissipative phenomena in ferroelectric ceramics using digital image correlation
Samuel Fink
Fraunhofer Institute for Laser Technology, Germany
Additive method for the laser-based manufacturing of all-ceramic piezoelectric thin film microelectromechanical systems
Alexandra Kozlowska
Silesian University of Technology, Poland
Enhancing mechanical properties of Al-alloyed medium-Mn steel by novel double-step intercritical annealing process
Anouchah Momeni
Université Paris-Saclay, Orsay, France
Grazing Fast Atom Diffraction (GIFAD): an advanced real-time surface characterization technique
Katherina Fernández
Universidad de Concepción, Laboratorio de Biomateriales, Chile
Swelling behavior of silk fibroin-reduced graphene oxide composites and their response to different storage environments
Lucas Augusto Moisés
Federal University of São Carlos, Centro de Ciências Exatas e de Tecnologia, Brazil
Production, characterization and study of tin dioxide nanowires memristor devices
Miriama Šimunková
Slovak University of Technology, Bratislava, Slovakia
EPR spin trapping as a useful tool to study the activity of materials: from metal-complexes to photocatalysts
Oleksandr Tkach
CICECO Aveiro Institute of Materials, University of Aveiro, Portugal
Capacitive tactile sensors by additive manufacturing:
an electrode material comparison study
Chun-Yi Chen
Tokyo Institute of Technology, Japan
Ti−Nb−Ta−Zr−O nanotubes: interfacial charge dynamics and solar hydrogen production
Andreea Groza
National Institute for Lasers, Plasma and Radiation Physics, Romania
Analysis of physicochemical and mechanical properties of magnesium doped hydroxyapatite based coatings
Mykola Shatalov
Ariel University, Israel
Magnetron sputtering of Gadolinium doped ceria thin films
Mihai Serbanescu
National Institute for Lasers, Plasma and Radiation Physics, Romania
Detection of contaminant molecules in seawater environment by novel UV diode based optoelectronic modules
Bogdan Bita
National Institute for Lasers, Plasma and Radiation Physics, Romania
Electrical effects of CNT coatings on the interdigital gas sensors
Ellis Ernst
North-West University, Potchefstroom, South Africa
Atomic oxygen effects on poly(2,5)benzimidazole, multiwalled carbon nanotube composite: an experimental and molecular dynamics study
Katherina Fernández
Universidad de Concepción, Laboratorio de Biomateriales, Chile
Influence of pH and storage conditions on the swelling behavior of a collagen (COL) and reduced graphene oxide (rGO) composite material
Lionel Fabian Fourie
University of the Western Cape, South Africa
ABPBI/MWCNT nanocomposites for proton radiation shielding applications in the low earth orbit environment
Lāsma Bugovecka
University of Latvia, Institute of Chemical Physics, Latvia
Synthesis and bending tests of flexible MWCNT and Bi2Se3 polymer composite thermoelectric thin films
Davis Gavars
University of Latvia, Institute of Chemical Physics, Latvia
Thermoelectric applications of metal oxide nanowire networks fabricated by thermal oxidation technique
Tso-Fu Mark Chang
Tokyo Institute of Technology, Japan
Micro-compression and micro-hardness of electrodeposited Nickel-Cobalt alloys
Raitis Sondors
University of Latvia, Institute of Chemical Physics, Latvia
Physical vapor deposition synthesis methods for Bi2Se3 nanoribbons with tunable geometry
Arturas Katelnikovas
Vilnius University, Lithuania
Highly reliable, simple, and fast synthesis method for all-inorganic lead perovskite quantum dots
Vaidas Klimkevičius
Vilnius University, Lithuania
Tailoring of CsPbBr3 optical properties via post-synthesis modification of QDs surface
Medeina Steponavičiūtė
Vilnius University, Lithuania
Governing of CsPbBr3 QDs emission via post-synthesis surface ion exchange
Tea-Sung (Terry) Jun
Incheon National University, Republic of Korea
Deformation study of pure titanium at cryogenic temperature
Angela Crespi
Université Paris-Saclay, CNRS, Laboratoire de Physique des Gaz et des Plasmas, France
High efficiency of graphite-like coated copper metal additive powder in laser welding
Anthony N. Papathanassiou
National and Kapodistrian University of Athens, Greece
Enhanced electro-mechanical coupling of piezoelectric polyvinyl alcohol–polyvinylidene fluoride blends by dispersing nano-graphene platelets